TECHNICAL EXPLANATIONS MT10 MT16

The MT-10 and MT-16 range of mini actuators is our entry-level product, providing a pull/push function for lifting, blocking, locking or any other very occasional movement and adjustment. They are the most economical solution for power movements on equipment with low operating rates. Thanks to their simplicity and ease of use via their 12 or 24 V DC power supply, they are particularly well suited to small series-produced equipment with low operating rates, but where reliability and robustness are required.

 

Main features of the MT-10 and MT-16 mini actuators

Possible strokes and forces

Options

Mounting accessories
  • Streamlined, economical construction
  • Trapezoidal screw drive system
  • Exclusive 12 or 24 V DC drive
  • S3 duty cycle for occasional use only
  • No limit switch (to be fitted to the mechanism yourself)
  • Maintenance-free actuator, mechanical travel system greased for life
  • Self-locking actuators (irreversible)
  • Simple to install and economical to run
  • MT-10 Stroke: from 50 mm to 300 mm
  • MT-16 Stroke: 50 mm to 2000 mm
  • MT-10 Force : from 20 daN to 120 daN
  • MT-16 Force : from 50 daN to 1000 daN
  • Electronic current-limiting board for
    cut-off in the event of overload or end of travel
  • Bearings and mounting brackets for trunnions

 

1) MT10d mini actuator with rotating screw and protected travel rod

Maximum force: 120 daN - Maximum stroke: 300mm

 
 

2) MT10s mini actuator compact size thanks to the translation system using an open non-rotating screw passing through the gearbox.

Maximum force: 120 daN - Maximum stroke: 300mm

 
 

3) MT16d mini actuator with open rotating screw and translation nut

Maximum force: 1000 daN - Maximum stroke: 200mm

 
 

4) MT16s mini actuator compact size thanks to the translation system using an open, non-rotating screw passing through the gearbox

Maximum force: 1000 daN - Maximum stroke: 2000mm